Coffin long nail tips

Application Method:

1. Removal.
2. Shorten the natural nail to 1 mm and create a rounded shape.
3. Lightly file the nail surface with a 220-grit file without applying pressure, lifting the scales of the nail plate, or use a 100-grit buffer.
4. Perform a manicure.
5. If using removers, wash hands with soap afterward.
6. Degrease the nail using LUNAmoon Nail Prep. Perform two passes. Use 4 wipes (1 wipe per 5 fingers). First pass: wipe the nail surface. Second pass: wrap a wipe around an orange stick and thoroughly clean the cuticle area and sidewalls.
7. Use a dehydrator (optional).
8. Apply LUNAmoon Primer.
9. Apply a thin rubbing layer of LUNAmoon Rubber Base using a flat gel brush. Carefully cover the sidewalls and cure for 60 seconds.
10. Remove the tacky layer.
11. Select tips according to the desired size.
12. Apply base coat to the contact area inside the tip.
13. Place the tip onto the nail and slightly press it with your finger, transferring the hand into the lamp and curing until fully polymerized.
14. Shape the form using a file and/or a drill bit.
15. Remove the tacky layer and dust.
16. Apply another layer of Rubber Base and cure for 30 seconds.
17. Level only with colored bases. The tips are already hard, and applying a hard tip plus a hard material may cause breakage.
18. Level with a transparent base if using gel polish.
19. Cure in the lamp for 120 seconds.
20. Apply top coat and cure for 120 seconds. After curing, do not wipe the surface, as this may reduce the shine.

 

Correction Method:

1. Remove the coating down to the natural nail. If there is lifting, remove it with a drill bit.
2. File the natural nail surface using a file with gentle pressure on the top of the nail, or use a buffer with a grit of 100.
3. Shape the nail.
4. Perform a manicure.
5. If using removers, wash hands with soap after use.
6. Dehydrate the nail using LUNAmoon Nail Prep. Apply it in two steps. Use four wipes for this process (one wipe per five fingers). First step: wipe the nail surface. Second step: wrap a wipe around an orange wood stick and clean the cuticle area and sidewalls.
7. Use a dehydrator (optional).
8. Apply a primer by blotting.
9. It is best to apply a thin layer of LUNAmoon Rubber Base using a flat gel brush. The fingers should remain in the lamp for no longer than 60 seconds.
10. Remove the tacky layer.
11. Level the nail using colored bases. File the free edge, and if the free edge is hard, file the hard material where lifting is present.
12. Apply a clear base coat if using a two-step gel polish system, and cure for 60 seconds.
13. Remove dust with a brush.
14. Cure in the lamp for 120 seconds.
15. Apply top coat and cure for 120 seconds. After curing, do not wipe the surface, as this may reduce the shine.